Chassis Link Mounting System for 3/4 Inch Heims (Batwing) Under Cover Fab
The UCF Chassis Link Mounting System (Batwing) was designed to allow you to easily mount your lower links to a crossmember at the chassis side. It mounts to 1 3/4 Inch OD round tube. The mount is laser cut from 5/16 Inch carbon steel plate.
It fits together like a puzzle with tabs and slots to create mounting points that are just over 2 Inch wide. 5/8 Inch mounting holes are provided, but they can be oversized easily for larger bolt sizes. The key feature that differentiates our Batwing from that of other off-road shops is that it provides a smooth transition from the skid plate to the mount by offsetting the suspension joints up a bit.
The mount provides 7 Inch of lateral seperation and 40 degrees of total angle between the joints.
Details:
- 5/16 Inch carbon steel plate
- Mounts to 1 3/4 Inch OD round tube
- Mount provides 7 Inch of lateral seperation and 40 degrees of total angle between the joints
Related Products
From this Collection
-
Under Cover Fabworks
UCF 4140 Chromoly Mounting Stud for Divorced Ford NP205 and Dana 24 -
Under Cover Fabworks
UCF Aluminum Trail Door Hinges for Jeep JK, JL and JT -
Under Cover Fabworks
UCF Aluminum Trail Door Hinges for Jeep CJ, YJ, TJ and LJ -
Under Cover Fabworks
UCF Jeep JL, JLU & JT Aluminum Trail Doors (Front/2-Door) -
Under Cover Fabworks
UCF Stubby Aluminum Front Bumper for Jeep Wrangler JK, JL & JT -
Under Cover Fabworks
UCF JL Unlimited D-Pillar Fender Top Mounts -
Under Cover Fabworks
UCF Aluminum Gas Tank Skid for Jeep JK 4-Door -
Under Cover Fabworks
UCF Aluminum Gas Tank Skid for Jeep JK 2-Door -
Under Cover Fabworks
UCF In-line Link Tabs for Tube Chassis -
Under Cover Fabworks
UCF Corner Guards for Jeep JK 2-Door -
Under Cover Fabworks
UCF Jeep JL Inner Tire Carrier Reinforcement Bracket -
Under Cover Fabworks
UCF Jeep JL Outer Tire Carrier Reinforcement Bracket -
Under Cover Fabworks
UCF Jeep JL Heavy-Duty Tire Carrier Bracket -
Under Cover Fabworks
UCF Heavy-Duty JL Tailgate Hinge Set -
Under Cover Fabworks
UCF Jeep JL Tailgate Hinge Reinforcement Brackets -
Under Cover Fabworks
UCF YJ, TJ & LJ 4.0L Engine Skid Bracket and Hardware Kit -
Under Cover Fabworks
Flat Rubber Bushing for LOPRO Mount Under Cover FabworksThis rubber bushing is the replacement for the flat rubber bushing on the UCF LOPRO Mount.Details... -
Under Cover Fabworks
JL Rear Dana 35 M200 HD Diff Cover (DIY Kit) Under Cover FabworksWe have redesigned the fabricated steel diff cover to be easier to assemble. The one piece folded... -
Under Cover Fabworks
JL Rear Dana 35 M200 HD Diff Cover (Welded) Under Cover FabworksWe have redesigned the fabricated steel diff cover to be easier to assemble. The one piece folded... -
Under Cover Fabworks
JL Front Dana 30 M186 HD Diff Cover (DIY Kit) Under Cover FabworksWe have redesigned the fabricated steel diff cover to be easier to assemble. The one piece folded... -
Under Cover Fabworks
JL Front Dana 30 M186 HD Diff Cover (Welded) Under Cover FabworksWe have redesigned the fabricated steel diff cover to be easier to assemble. The one piece folded... -
Under Cover Fabworks
Dynatrac XD 60 HD Diff Cover (DIY Kit) Under Cover FabworksWe have redesigned the fabricated steel diff cover to be easier to assemble. The one piece folded... -
Under Cover Fabworks
Dynatrac XD 60 HD Diff Cover (Welded) Under Cover FabworksWe have redesigned the fabricated steel diff cover to be easier to assemble. The one piece folded... -
Under Cover Fabworks
Super Duty Dana 60 HD Diff Cover (DIY Kit) Under Cover FabworksWe have redesigned the fabricated steel diff cover to be easier to assemble. The one piece folded... -
Under Cover Fabworks
Super Duty Dana 60 HD Diff Cover (Welded) Under Cover FabworksWe have redesigned the fabricated steel diff cover to be easier to assemble. The one piece folded... -
Under Cover Fabworks
4-Bolt Offset Flange for 1-3/4 Inch Round Tube Under Cover FabworksThese brackets are laser cut from 1/4 inch carbon steel plate and are sold individually. They are... -
Under Cover Fabworks
4-Bolt Center Flange for 1-3/4 Inch Round Tube Under Cover FabworksThese brackets are laser cut from 1/4 inch carbon steel plate and are sold individually. They are... -
Under Cover Fabworks
2-Bolt Center Flange for 1-3/4 Inch Round Tube Under Cover FabworksThese brackets are laser cut from 3/16 inch carbon steel plate and are sold individually. They ar... -
Under Cover Fabworks
2-Bolt Center Flange for 1-1/2 Inch Round Tube Under Cover FabworksThese brackets are laser cut from 3/16 inch carbon steel plate and are sold individually. They ar... -
Under Cover Fabworks
2-Bolt Center Flange for 1-1/4 Inch Round Tube Under Cover FabworksThese brackets are laser cut from 3/16 inch carbon steel plate and are sold individually. They ar... -
Under Cover Fabworks
Traction Link Tab for Large Axle Tubes Under Cover FabworksThe UCF Traction Link Tab for Large Axle Tubes is laser cut from 5/16 inch carbon steel plate. It... -
Under Cover Fabworks
Universal Winch Fairlead Mount Under Cover FabworksThis bracket is fabricated from 3/16 inch carbon steel. It is welded inside and out and sanded sm... -
Under Cover Fabworks
Carbon Steel Engine Skid Plate for 1987-1995 YJ (4.0L) Under Cover FabworksThis UCF Engine Skid Plate was designed to fit the 1987-1995 Jeep Wrangler YJ. The skid plate its... -
Under Cover Fabworks
Aluminum Engine Skid Plate for 1987-1995 YJ (4.0L) Under Cover FabworksThis UCF Engine Skid Plate was designed to fit the 1987-1995 Jeep Wrangler YJ. The skid plate its... -
Under Cover Fabworks
JL and JT Rubicon Rear Dana 44 M220 HD Diff Cover (DIY Kit) Under Cover FabworksWe have redesigned the fabricated steel diff cover to be easier to assemble. The one piece folded... -
Under Cover Fabworks
JL and JT Rubicon Rear Dana 44 M220 HD Diff Cover (Welded) Under Cover FabworksWe have redesigned the fabricated steel diff cover to be easier to assemble. The one piece folded... -
Under Cover Fabworks
JL and JT Rubicon Front Dana 44 M210 HD Diff Cover (DIY Kit) Under Cover FabworksWe have redesigned the fabricated steel diff cover to be easier to assemble. The one piece folded... -
Under Cover Fabworks
JL and JT Rubicon Front Dana 44 M210 HD Diff Cover (Welded) Under Cover FabworksWe have redesigned the fabricated steel diff cover to be easier to assemble. The one piece folded... -
Under Cover Fabworks
6061-T6 Aluminum Winch Plate for Jeep CJ Under Cover FabworksThis UCF HD Winch Plate is laser cut from 1/4 inch 6061-T6 Aluminum plate and formed on a CNC pre... -
Under Cover Fabworks
Carbon Steel Winch Plate for Jeep CJ Under Cover FabworksThis UCF HD Winch Plate is laser cut from 1/4 inch thick carbon steel plate and brake-formed on a... -
Under Cover Fabworks
Steel Gas Tank Skid for Jeep YJ Under Cover FabworksThe UCF Steel Gas Tank Skid for 1987-1995 Jeep Wrangler YJ models is laser cut from 3/16 inch thi... -
Under Cover Fabworks
No Body-Lift Steel Gas Tank Skid for Jeep YJ Under Cover FabworksThe UCF Steel Gas Tank Skid for 1987-1995 Jeep Wrangler YJ models is laser cut from 3/16 inch thi... -
Under Cover Fabworks
Aluminum Gas Tank Skid for Jeep YJ Under Cover FabworksThe UCF Aluminum Gas Tank Skid for 1987-1995 Jeep Wrangler YJ models is laser cut from 3/16 inch ... -
Under Cover Fabworks
No Body-Lift Aluminum Gas Tank Skid for Jeep YJ Under Cover FabworksThe UCF Aluminum Gas Tank Skid for 1987-1995 Jeep Wrangler YJ models is laser cut from 3/16 inch ... -
Under Cover Fabworks
Aluminum Rear Bumper for Jeep JKThe UCF Aluminum Rear Bumper for Jeep JK is a great option for those that want more protection th... -
Under Cover Fabworks
Steel Rear Bumper for Jeep JK Under Cover FabworksThe UCF Steel Rear Bumper for Jeep JK is a great option for those that want more protection than ... -
Under Cover Fabworks
Steel Rear Bumper and Tire Carrier for Jeep JK Under Cover FabworksThe UCF Steel Rear Bumper and Tire Carrier for Jeep JK is a great option for those that want more... -
Under Cover Fabworks
Wrangler YJ/TJ Rear Bumper Steel Under Cover FabThis new TJ rear bumper is fabricated from carbon steel to produce a very strong product. The tot... -
Under Cover Fabworks
Jeep JK Transmission Cross-Member Steel 12-18 Wrangler JK Under Cover FabThe UCF Transmission Cross-Member for Jeep JK is fabricated from 3/16 inch carbon steel plate tha...
