Jeep JL 1310 Heavy Duty Front Driveshaft 18-pres Wrangler JL Manual Transmission

1310 Heavy Duty front driveshaft for 2 and 4 door Jeep JL models with a manual transmission. Replacement Driveline. This System is stronger than O.E. type applications recommended for stock to 4 1/2 inch lift and up to 35 inch tires for mild use. 2 door with 4 1/2 inch...
$689.00

Reel Driveline

DRIVESHAFTS

-
+
$629.00
Real time +14 visitor right now

1310 Heavy Duty front driveshaft for 2 and 4 door Jeep JL models with a manual transmission. Replacement Driveline. This System is stronger than O.E. type applications recommended for stock to 4 1/2 inch lift and up to 35 inch tires for mild use. 2 door with 4 1/2 inch lift are recommended to use 1350 rear driveline.

J.E. Reel Drivelines are designed to work with 2 1/2 inchand 4 1/2 inch lifts from most lift manufacturers. Lifts higher than 4 1/2 inch or long arm lifts must be measured for driveline length. It is best to measure all drivelines if possible.
The purchaser shall be responsible to determine all design and/or specification parameters and the suitability of any particular product for its intended use.

Note: JL 2018 Powertrain is installed at 9.25 Degree. This means the Transfer Case rear output slopes down to rear axle and front output slopes up away from front axle. This is especially important to consider on the 2018 model JL. Maximum Angle 1310 C.V. Less than 26 Degree and 1350 C.V. Less than 32 Degree.
Details:

  • Collapsed Length 35.375 inch
  • Ride Height 36.875 inch
  • Extended Length 38.375 inch
  • U Joint Style 1310 W/ ZERK
  • Tube size 2.00X.120 Inch
  • Pinion/Yoke 2-4-3124R
  • T/C Yoke 2-4-5341-10R
  • Max Tire 35 Inch

Kits Include:

  • Pinion Yoke
  • Transfer Case Yoke
  • Retaining Hardware
  • Fastners Included

Recently Viewed Products