1310 Heavy Duty rear driveshaft for 2 and 4 door Jeep JL models with an automatic transmission. Replacement Driveline. This System is stronger than O.E. type applications recommended for stock to 4 1/2 inch lift and up to 35 inch tires for mild use. 2 door with 4 1/2 inch lift are recommended to use 1350 rear driveline.

J.E. Reel Drivelines are designed to work with 2 1/2 inch and 4 1/2 inch lifts from most lift manufacturers. Lifts higher than 4 1/2 inch or long arm lifts must be measured for driveline length. It is best to measure all drivelines if possible.

The purchaser shall be responsible to determine all design and/or specification parameters and the suitability of any particular product for its intended use.

Note: JL 2018 Powertrain is installed at 9.25 Degree. This means the Transfer Case rear output slopes down to rear axle and front output slopes up away from front axle. This is especially important to consider on the 2018 model JL. Maximum Angle 1310 C.V. Less than 26 Degree and 1350 C.V. Less than 32 Degree.

Details:

• Rear Automatic Transmission
• Collapsed Length 22.375 Inch
• Ride Height 23.875 Inch
• Extended Length 25.375 Inch
• U Joint Style 1310 W Zerk
• Tube size 2.00X.120 Inch
• Pinion/Yoke 2-4-3124R
• T/C Yoke 2-4-5341-10R
• Max Tire 35 Inch

Kits Include:

• Pinion Yoke
• Transfer Case Yoke
• Retaining Hardware
• Fastners Included