Shock Plus Lower Link Axle Combo Brackets 10 Degree Pair Artec Industries
Shock plus Lower Link Axle Combo Brackets (pair). Is space tight on your axle and you can't mount your shocks? Or do you need to mount the shocks offset off the axle tube. This combo bracket takes our best selling Lower Link Axle Brackets and combines them with our new Lower Link Shock Tabs to allow you to mount your shocks offset from the axle tube. These tabs work on all three angles of lower link so you don't have to have some big specialty combo bracket that looks goofy and is bigger than a normal link bracket. These tabs also allow you to use different shock mounting widths so you don't have to spend time modifying either the bracket or the shocks to fit within a preset bracket width. Mount your shocks over the lower link joints; offset from the axle tube center line. Grease fitting access on top to allow Easy maintenance of your most abused joint. Skid plate of bottom of bracket wraps around joint protecting it from direct impact and decreases premature wear on the joint. This leads to longer life and less replacements. Skid plate design does not restrict movement of joint.
Details:
- Sold as Pair
- Lower Axle Link Angle: 10 degrees
- Use with any shock mounting width from 1.25 inch-1.6 inch. Great For Air Shocks, Coilovers or ORI struts.
- Compact design. Lower Link Axle Brackets are our standard mounts so no special bracket is used.
- 2.625 inch mounting width with 9/16 inch bolt hole For common sized Cartridge Joints (Johnny, Flex, Ballistic, etc). Can be drilled out to larger hole size For 1.25 inch rod ends with spacers.
- Made from 1/4 inch thick boxed steel plate For strength and impact resistance.
- The Style of the bracket gives a unique, custom one off look you'd get with a high dollar fabrication shop.
- No more brackets that look like modified pieces of angle iron or c-channel, but rather formed pieces of artwork to show off.
- This Kit requires general welding and fabrication skills. Welding should only be done by a competent welder.
- Artec Industries implies no guarantees or warranties and is not liable For improper installation.
- Some very slight grinding and fitment may be required when used with the 22 degree lower link axle bracket
Related Products
From this Collection
-
Artec Industries
07-Up Jeep Wranger/Gladiator High Clearance Front Bumper Raw Steel$999.99Artec Industries' Bantam Series Front Bumper: USA-made, CNC laser-cut steel for ultimate resilien... -
Artec Industries
07-Up Jeep Wranger/Gladiator High Clearance Front Bumper Powdercoat Black Steel$1,399.99Artec Industries' Bantam Series Front Bumper: USA-made, CNC laser-cut steel for ultimate resilien... -
Artec Industries
07-Up Jeep Wranger/Gladiator High Clearance Front Bumper With Hoop Raw Steel$1,299.99Artec Industries' Bantam Series Front Bumper with Hoop: USA-crafted from CNC laser-cut steel. Fea... -
Artec Industries
07-Up Jeep Wranger/Gladiator High Clearance Front Bumper With Hoop Powdercoat Black Steel$1,599.99Artec Industries' Bantam Series Front Bumper with Hoop: USA-crafted from CNC laser-cut steel. Fea... -
Artec Industries
07-Up Jeep Wranger/Gladiator High Clearance Bash Skid$74.99USA-crafted 3/16 inch aerospace aluminum bash skid. Precision-machined for countersunk hardware, ... -
Artec Industries
07-Up Jeep Wranger/Gladiator High Clearance Rear Cut Bumper End Pods Raw Steel$2,299.99Introducing Bantam Bumpers by Artec Industries, a tribute to our roots and the iconic legacy of J... -
Artec Industries
07-Up Jeep Wranger/Gladiator High Clearance Rear Cut Bumper End Pods Black Powdercoat Steel$2,599.99Introducing Bantam Bumpers by Artec Industries, a tribute to our roots and the iconic legacy of J... -
Artec Industries
07-Up Jeep Wranger/Gladiator High Clearance Rear No Cut Bumper End Pods Raw Steel$2,395.96Introducing Bantam Bumpers by Artec Industries, a tribute to our roots and the iconic legacy of J... -
Artec Industries
07-Up Jeep Wranger/Gladiator High Clearance Rear No Cut Bumper End Pods Black Powdercoat Steel$2,699.99Introducing Bantam Bumpers by Artec Industries, a tribute to our roots and the iconic legacy of J... -
Artec Industries
07-Up Jeep Wranger/Gladiator High Clearance Rear Bumper Center Section Raw Steel$1,299.99Introducing Artec Industries' direct bolt-on Bantam Series Bumpers, inspired by the iconic legacy... -
Artec Industries
07-Up Jeep Wranger/Gladiator High Clearance Rear Bumper Center Section Black Powdercoat$1,499.99Introducing Artec Industries' direct bolt-on Bantam Series Bumpers, inspired by the iconic legacy... -
Artec Industries
07-Up Jeep Wranger/Gladiator High Clearance Rear Bumper Corner Pods Raw Steel$699.99Introducing Artec Industries Standard Comp Cut End-Pods, the integrated add-ons that come with yo... -
Artec Industries
07-Up Jeep Wranger/Gladiator High Clearance Rear Bumper Corner PodsBlack Powdercoat$799.99Introducing Artec Industries Standard Comp Cut End-Pods, the integrated add-ons that come with yo... -
Artec Industries
07-Up Jeep Wranger/Gladiator High Clearance Rear Bumper Center Skid Raw Aluminum$149.99Introduce a new layer of defense with Artec Industries' Bantam Series Aluminum Bash Skids. Specif... -
Artec Industries
07-Up Jeep Wranger/Gladiator High Clearance Rear Bumper Corner Pod Skid Raw Aluminum$149.99Introduce a new layer of defense with Artec Industries' Bantam Series Aluminum Bash Skids. Specif... -
Artec Industries
07-Up Jeep Wranger/Gladiator High Clearance Rear Bumper Corner Pods Boatside Cut Raw Steel$749.99Introducing Artec Industries Rear Boatside End-Pods, the optional yet essential upgrade for your ... -
Artec Industries
07-Up Jeep Wranger/Gladiator High Clearance Rear Bumper Corner Pods Boatside Cut Powdercoat Steel$849.99Introducing Artec Industries Rear Boatside End-Pods, the optional yet essential upgrade for your ... -
Artec Industries
Jeep High Clearance Rear Bumper Winch Fairlead Mounting Bracket$99.99Unleash the full potential of your off-road adventure with the American-made Bantam Series Rear W... -
Artec Industries
07-Up Jeep Wranger/Gladiator High Clearance Rear Bumper Corner Pods Skids Raw Aluminum$195.99Introduce a new layer of defense with Artec Industries' Bantam Series Aluminum Bash Skids. Specif... -
Artec Industries
discontinued Jeep JL Steel Bumper Winch Plate Wrangler JL and Gladiator$299.99***** Discontinued ***** -
Artec Industries
Jam Nut 3/4 Inch - 16 tpi Left Hand Reverse Thread Artec Industries$2.19Jam Nut for 3/4 inch 16 threads per inch (fine thread) rod ends. This nut in combination with a t... -
Artec Industries
Jam Nut 3/4 Inch - 16 tpi Right Hand Thread Artec Industries$2.19Jam Nut for 3/4 inch 16 threads per inch (fine thread) rod ends. This nut in combination with a t... -
Artec Industries
Jam Nut 7/8 Inch 14 tpi Right Hand Thread Artec Industries$2.49Jam Nut for 7/8 inch 14 threads per inch (fine thread) rod ends. This nut in combination with a t... -
Artec Industries
Jam Nut 7/8 Inch 14 tpi Left Hand Thread Artec Industries$2.49Jam Nut for 7/8 inch 14 threads per inch (fine thread) rod ends. This nut in combination with a t... -
Artec Industries
JL Apex Front Axle Armor Kit JL Sport, JL Sahara Artec$249.99JL/JT Apex Front Axle Truss - A new era has begun with the arrival of the Apex truss! Artec Indus... -
Artec Industries
Adjustable Link Tower Single Axe Tube Diameter 3.0 in Artec Industries$89.99This bracket is intended to both be highly functional and good looking - like most all our bracke... -
Artec Industries
Adjustable Link Tower Single Axe Tube Diameter 3.25 in Artec Industries$89.99This bracket is intended to both be highly functional and good looking - like most all our bracke... -
Artec Industries
JK APEX Front Axle Armor Kit D44 Raised Trackbar For 07-18 Wrangler JK Artec Industries$329.99JK APEX Front Axle Truss A new era has begun with the arrival of the APEX Truss! Artec Industries... -
Artec Industries
JK APEX Front Axle Armor Kit D44 Stock Trackbar For 07-18 Wrangler JK Artec Industries$309.99JK APEX Front Axle Truss A new era has begun with the arrival of the APEX Truss! Artec Industries... -
Artec Industries
Artec Hardcore Diff Cover for GM14T with 3/8in Bolts Artec Industries$216.99Artec Hardcore Performance Diff Covers are engineered for extreme conditions. Artec Hardcore Diff... -
Artec Industries
Artec Hardcore Diff Cover For 18-20 Wrangler JL M186/D30 Artec Industries$210.99Artec Hardcore Performance Diff Covers are engineered for extreme conditions. Artec Hardcore Diff... -
Artec Industries
Hardcore Diff Cover For 18-20 Wrangler JL M200/D35 Rear Artec Industries$210.99Artec Hardcore Performance Diff Covers are engineered for extreme conditions. Artec Hardcore Diff... -
Artec Industries
Hardcore Diff Cover For 18-20 Wrangler JL M210/D44 Front Artec Industries$210.99Artec Hardcore Performance Diff Covers are engineered for extreme conditions. Artec Hardcore Diff... -
Artec Industries
Hardcore Diff Cover For 18-20 Wrangler JL M220/D44 Rear Artec Industries$210.99Artec Hardcore Performance Diff Covers are engineered for extreme conditions. Artec Hardcore Diff... -
Artec Industries
Artec Hardcore Diff Cover for Dana 30 Artec Industries$204.99Artec Hardcore Performance Diff Covers are engineered for extreme conditions. Artec Hardcore Diff... -
Artec Industries
Easy 4 Link Kit C Tube 7/8 Inch and 1.25 Inch Rod Ends Artec Industries$1,199.99Our Easy 4-Link Kit C is the simplest way to get your links done. This kit is based off our most ... -
Artec Industries
Easy 4 Link Kit C Tube All 1.25 Inch Rod Ends Artec Industries$1,299.99Our Easy 4-Link Kit C is the simplest way to get your links done. This kit is based off our most ... -
Artec Industries
Easy 4 Link Kit C No Tube 7/8 Inch and 1.25 Inch Rod Ends Artec Industries$899.99Our Easy 4-Link Kit C is the simplest way to get your links done. This kit is based off our most ... -
Artec Industries
Easy 4 Link Kit C No Tube All 1.25 Inch Rod Ends Artec Industries$999.99Our Easy 4-Link Kit C is the simplest way to get your links done. This kit is based off our most ... -
Artec Industries
Easy 4 Link Kit C Tube All 1.25 Inch Krawler Joints With Dom Tube Artec Industries$1,349.99Our Easy 4-Link Kit C is the simplest way to get your links done. This kit is based off our most ... -
Artec Industries
Easy 4 Link Kit C No Tube All 1.25 Inch Krawler Joints Artec Industries$999.99Our Easy 4-Link Kit C is the simplest way to get your links done. This kit is based off our most ... -
Artec Industries
Easy 4 Link Kit C Bracket Set Artec Industries$349.99Our Easy 4-Link Kit C is the simplest way to get your links done. This kit is based off our most ... -
Artec Industries
7/8 in High Misalignment Spacers SS Pair 9/16 inch Artec Industries$15.49These spacers are great for using any heim that has 7/8 inch bore. Overall width when installed o... -
Artec Industries
License Plate LED Lights and Harness Kit Artec Industries$21.99Artec Industries has pieced together this light and harness kit to allow you to easily wire up li... -
Artec Industries
Offset Pro 3-piece Teflon lined 7/8 in Rod End w/ 7/8 Inch Bore Right hand standard Artec Industries$44.99These rod ends are the best way to add strength, reliability, and flexibility to any situation th... -
Artec Industries
Easy 3 Link Kit I Dual Bracket for Artec Truss Outside Frame Chevy / Ford 78-79 with DOM Artec Industries$1,349.99Our Easy 3-Link Kit I is the simplest way to get your links done. This kit is based off our most ... -
Artec Industries
Easy 3 Link Kit I Dual Bracket for Artec Truss Outside Frame Chevy / Ford 78-79 No Dom Artec Industries$999.99Our Easy 3-Link Kit I is the simplest way to get your links done. This kit is based off our most ... -
Artec Industries
Easy 3 Link Kit I Dual Bracket for Artec Truss Outside Frame Ford 85-91.5 with DOM Artec Industries$1,349.99Our Easy 3-Link Kit I is the simplest way to get your links done. This kit is based off our most ... -
Artec Industries
Easy 3 Link Kit I Dual Bracket for Artec Truss Outside Frame Ford 85-91.5 No Dom Artec Industries$999.99Our Easy 3-Link Kit I is the simplest way to get your links done. This kit is based off our most ...